Harley-Davidson CVO Street Glide 3 Limited Builder Components

Genuine Harley-Davidson

When high-performance engine modifications are made, the increased torque is transferred via the crankshaft to the drive system, putting a significantly higher load on the bearing. The Lefty Bearing is case-hardened on the inner and outer race to provide increased load capacity and enhanced durability in high-torque applications. The bearing is installed in the left side of the crankcase, and supports the output shaft to the primary drive system.

Genuine Harley-Davidson

These premium pushrods are tapered for enhanced clearance at the cylinder head, allowing the use of higher lift cams. The one-piece chrome moly tube adds rigidity and durability and the threaded adjustment feature provides easy cam installation without removing the cylinder heads or rocker boxes. Chrome covers. The tube features 6 flats, with one flat marked with a large dot for tracking the adjustment. The threaded rod features 4 flats to reduce wrench swing. Each pushrod features the Screamin' Eagle logo and is marked for "Intake" or "Exhaust". Kit includes 4 pushrods and required pushrod tube covers.

Genuine Harley-Davidson

These performance Beehive-shaped valve springs provide increased stiffness and strength in a compact design. Designed to support the installation of higher lift cams, these performance springs help maintain the stability of the valve train in high RPM conditions. When compressed, these valves have a higher rate of stiffness to keep the valves from bouncing off the valve seat or "floating" during aggressive throttle application. Kit includes 8 springs, upper collars and keepers and lower collars with integral valve seals.