Harley-Davidson TOURING ELECTRA GLIDE ULTRA CLASSIC Builder Components

Genuine Harley-Davidson

Screamin' Eagle Milwaukee-Eight Headbolt Kit

Genuine Harley-Davidson

Optimize performance from your Stage IV equipped Milwaukee-Eight powertrain by bolting on this Extreme-Flow 64mm Intake Manifold. Cast aluminum body and ported intake runners provide the smooth, undisturbed air intake you need for maximum power output. Delivers a 2% - 4% horsepower increase you'll notice every time you twist the throttle. Updated calibrations make installation and tuning easy. All models require ECM calibration for proper installation. 50-State U.S. EPA compliant.

Genuine Harley-Davidson

Increased strength rocker supports will handle the increased loads from higher lift cams and higher RPM applications. This product keeps valve train geometry solid. Works with stock or roller rocker arms. Includes required hardware for installation.

Genuine Harley-Davidson

Individual combination front and rear axle wrenches available for your model. 15/16" & 36mm.

Genuine Harley-Davidson

These one-piece tapered pushrods are stiffer than conventional pushrods and are lighter than adjustable pushrods. They are perfectly sized for the engine builder who knows what head and cam combination are being used. Four sizes to fit the most popular head and cam combinations. Sold in sets of 4.

Genuine Harley-Davidson

Bring your Twin Cam motorcycle up to the same 110 cubic inch displacement and power output as the CVO Screamin' Eagle models without extensive machining or removing the engine from the chassis. This kit combines the proven SE-255 cams and cylinder heads of the CVO model with exclusive Screamin' Eagle bolt-on 4.0" cylinders and system-matched pistons to deliver high torque and reliable everyday performance.

Genuine Harley-Davidson

This massive 58mm bore Throttle Body is extruded, precision machined, and polished to provide all the air you'll need to dominate at the track. Designed for use with Screamin' Eagle Pro cylinder heads. Injectors mount to the Screamin' Eagle Manifold.

Genuine Harley-Davidson

When high-performance engine modifications are made, the increased torque is transferred via the crankshaft to the drive system, putting a significantly higher load on the bearing. The Lefty Bearing is case-hardened on the inner and outer race to provide increased load capacity and enhanced durability in high-torque applications. The bearing is installed in the left side of the crankcase, and supports the output shaft to the primary drive system.

Genuine Harley-Davidson

These pushrods have been designed to allow for easier installation, adjustment, and improved durability. The unique Screamin' Eagle design allows for installation of camshafts in the Twin Cam without the removal of the heads or rocker boxes. The design is also a great performer, constructed of stiff chrome moly tubing and thread-rolled adjusters. Installation retains the Original Equipment chrome short center tube for a high contrast look. Kit includes gloss black pushrod tubes and clips for adjustment of pushrods.

Genuine Harley-Davidson

Born from racing, the Screamin' Eagle Racing - King 6 is a battle-tested performance transmission developed by the Harley-Davidson Factory Race Team competing in the Mission King of the Baggers series. Engineered for enhanced gear engagement and durability. Key features include modified back-cut angles on the shift dogs to improve gear engagement, and super premium heat treat and shot peening on gears and shafts to ensure race-tough strength and durability. You'll enjoy the smooth shifting performance and know this transmission is built with extreme performance in mind. Bolt-in installation. Super premium heat treated and shot peened gears ensure race-tough strength and durability. Torque capacity increased by +25% over the Original Equipment transmission. Smooth gear engagement for quicker shifts. Back cut gears and shift lug/pockets undercut for improved engagement and reduced friction. Upgraded bearings. Screamin' Eagle branding on bearing door. Requires Gasket Installation Kit (P/N 36300043), which includes gaskets, O-rings, main drive seal and bearing, and inner primary bearing race (sold separately).

Genuine Harley-Davidson

These one-piece tapered pushrods are stiffer than conventional pushrods and are lighter than adjustable pushrods. They are perfectly sized for the engine builder who knows what head and cam combination are being used. Four sizes to fit the most popular head and cam combinations. Sold in sets of 4.

Genuine Harley-Davidson

These premium pushrods are tapered for enhanced clearance at the cylinder head, allowing the use of higher lift cams. The one-piece chrome moly pushrod adds rigidity and durability, and the threaded adjustment feature provides easy cam installation without removing the cylinder heads or rocker boxes. To simplify adjustment, the pushrod features six flats, with one flat marked with a large dot for tracking the adjustment. The threaded rod features 4 flats to reduce wrench swing. Kit includes 4 pushrods, required gloss black pushrod tube covers and o-rings.

Genuine Harley-Davidson

These premium pushrods are tapered for enhanced clearance at the cylinder head, allowing the use of higher lift cams. The one-piece chrome moly tube adds rigidity and durability and the threaded adjustment feature provides easy cam installation without removing the cylinder heads or rocker boxes. Chrome covers. The tube features 6 flats, with one flat marked with a large dot for tracking the adjustment. The threaded rod features 4 flats to reduce wrench swing. Each pushrod features the Screamin' Eagle logo and is marked for "Intake" or "Exhaust". Kit includes 4 pushrods and required pushrod tube covers.

Genuine Harley-Davidson

These Screamin' Eagle Twin Cam crankcases are precisely machined with the larger cylinder bores required to accept 4.060" cylinders and can be used to build 113CI and 120CI motors. The crankcase is pre-assembled with Screamin' Eagle Piston Oil Jets designed to accommodate a 4-3/8" or 4-5/8" Stroker Crank Assembly, and features a factory-installed high-capacity Lefty main bearing, right side bearing, and Screamin' Eagle high-performance cam bearings. Includes Manufacturer's Statement of Origin (MSO - Domestic only).

Genuine Harley-Davidson

Turn your Original Equipment 110 cubic inch model into a track-ready 117 cubic inch hauler without removing the engine from the chassis. This kit features exclusive bolt-on 4.125" bore cylinders that are engineered with high strength steel liners that slip into the existing factory 110CI Twin Cam crankcase openings. System-matched pistons combine with the Original Equipment CVO cylinder heads to produce a strong 9.9:1 compression ratio. Installation does not require case machining or modification. Kit includes Screamin' Eagle 4.125" Bolt-On Cylinders.

Genuine Harley-Davidson

Screamin' Eagle Pro High Volume Oil Pump & Cam Support Plate Kit

Genuine Harley-Davidson

Big Bore 4.0" Bolt-On Cylinders. CNC-Ported Factory Cylinder Heads. Forged 10.5:1 Compression Pistons. SST Piston Rings. SE-259 cams. Perfect-Fit Pushrods. High-Capacity Roller Tappets. 58mm Throttle Body. High Flow Fuel Injectors. Heavy Duty Clutch Spring. Top End Gasket Kit. Cam Cover Gasket.

Genuine Harley-Davidson

Screamin' Eagle Pro High Volume Oil Pump & Cam Support Plate Kit

Genuine Harley-Davidson

Convert a 2003-later Twin Cam model with a factory-installed roller bearing to a Timken tapered bearing. Used with Screamin' Eagle Timken Bearing Tool P/N 34823-08.

Genuine Harley-Davidson

This street-tuned 120 cubic inch Screamin' Eagle Crate Motor takes your bagger from mild to wild. This engine is designed for bolt-in installation in the Original Equipment-style chassis of your Touring bike. The crankcase, cylinders and heads are painted black, and feature machined aluminum highlights and chrome covers for a stunning "show-and-go" look. Equipped with the ultimate large bore Screamin' Eagle 58mm Throttle Body (18% larger than stock), this engine is capable of producing 106 horsepower and 117 lb-ft of torque at the rear wheel. The engine retains the Original Equipment vehicle warranty. U.S. delivered engines include a Manufacturer's Statement of Origin (MSO). CARB approval pending. Developed and tested in Milwaukee, this motor features the finest Screamin' Eagle components: 4.060 big-bore cylinders; 4-5/8" stroke SE Pro stroker flywheel and rod assembly; 10.5:1 high-compression nickel-plated forged pistons with Teflon coated skirt; Titanium SST piston rings; SE-259E high-lift cams; Perfect Fit push rods; SE high-performance lifters; CNC-ported MVA heads with automatic compression release; Screamin' Eagle Pro High-Flow 58mm EFI Throttle Body, high flow injectors and manifold clamps; machined lower rocker boxes for valve spring collar clearance; factory-machined engine cases; unique piston oilers for stroker clearance; Screamin' Eagle inner crankcase full complement cam needle bearings; SE Lefty high-performance crankcase output bearing and nitride bearing race; SE Performance spark plugs; and 120ST cam cover and cylinder head medallions.

Genuine Harley-Davidson

Leave other riders in the dust with the biggest, most powerful street-compliant crate performance engine Harley-Davidson has ever created. Built from the bottom up in Milwaukee, this street-tuned 131-cubic-inch Screamin' Eagle Crate Engine is designed to run with a wide open throttle at high engine speeds and provide instant passing power from cruising speed. Made for riders seeking maximum displacement, compression and flow, it delivers 131 ft-lb of torque to the rear wheel as soon as the throttle is cranked. The Stage IV equipped engine includes 131 Stage IV badging on the cylinder heads and timer cover to highlight the powerplant. This street-ready performance motor features the finest Screamin' Eagle components: engraved CNC-ported cylinder head with CNC-machined chamber and 1mm larger valves, SE8-517 high-lift cam, high-compression forged pistons, high-performance cam bearing, high-performance tappets, patent-protected 4.31" steel sleeve cylinders, 64mm throttle body and cast manifold, and 5.5 g/sec fuel injectors. Black and Chrome finish. Ready for bolt-in installation in the Original Equipment-style chassis of your Touring bike. No special fabrication or engine-mount relocation is required. The engine features a one-year manufacturer's warranty for unmatched confidence. Eligible for coverage under factory vehicle warranty when dealer-installed within 60 days of vehicle purchase. Factory assembled at the Powertrain Operations facility in Milwaukee, Wisconsin.

Genuine Harley-Davidson

Now, racers can take their model's Original Equipment 110 cubic inch motor to a full 117 cubic inches without removing the engine from the chassis. The Screamin' Eagle team has engineered a 4.125" Big Bore Cylinder and Piston package that increase the internal bore from 4.0" to 4.125", without increasing the outside diameter of the cylinder spigot. The cylinder slips into the existing case bore without modification. Have you already installed a CVO Stage III performance kit on your CVO 110 Twin Cam motor? If so, you can retain that performance investment and combine those components with this kit. This kit will add a whopping 7 cubic inches of displacement for more torque throughout the RPM range. The kit includes front and rear cylinders, system-matched pistons with rings, and cylinder head gaskets. All EFI models require ECM calibration (priced separately). For race application only.

Genuine Harley-Davidson

Automatic Compression Release

Genuine Harley-Davidson

These premium pushrods are tapered for enhanced clearance at the cylinder head, allowing the use of higher lift cams. The one-piece chrome moly tube adds rigidity and durability, and the threaded adjustment feature provides easy cam installation without removing the cylinder heads or rocker boxes. To simplify adjustment, the tube features six flats, with one flat marked with a large dot for tracking the adjustment. The threaded rod features 4 flats to reduce wrench swing. Each pushrod features the Screamin' Eagle logo and is marked for "Intake" or "Exhaust". Kit includes 4 pushrods and required pushrod tubes.

Genuine Harley-Davidson

The biggest engines deserve the most fuel. This huge 58mm Throttle Body (8mm or 16% larger than stock) won't leave your engine starving for more air. The one-piece throttle body features Electronic Throttle Control technology.

Genuine Harley-Davidson

This comprehensive kit provides a complete package of matched components that allow you to build a high performance 110ci Twin Cam without voiding the factory warranty. The unique Screamin' Eagle 4.0" big bore cylinders are engineered to slip into the engine cases without case machining or modification, so the engine stays in the chassis during the build.

Genuine Harley-Davidson

Turn your Original Equipment 110 cubic inch model into a track-ready 117 cubic inch hauler without removing the engine from the chassis. This kit features exclusive bolt-on 4.125" bore cylinders that are engineered with high strength steel liners that slip into the existing factory 110CI Twin Cam crankcase openings. System-matched pistons combine with the Original Equipment CVO cylinder heads to produce a strong 9.9:1 compression ratio. Installation does not require case machining or modification. Kit includes Screamin' Eagle 4.125" Bolt-On Cylinders.

Genuine Harley-Davidson

This track-ready 120 cubic inch Screamin' Eagle Crate Motor is waiting to provide a racing enthusiast the opportunity to go racing at an affordable price. This engine is designed for bolt-in installation in the Original Equipment-style chassis of your track bike. The crankcase, cylinders and heads are painted black, and feature machined aluminum highlights and chrome covers for a stunning "show-and-go" look. When equipped with an appropriate high-flow carburetor or throttle body and injectors, an open air induction, and tuned exhaust, this engine is capable of producing a reliable 135+ horsepower at the rear wheel. Engines include a Manufacturer's Statement of Origin (MSO - domestic only). These race-use engines feature only the finest Screamin' Eagle components: 4.060" big-bore cylinders; 4-5/8" stroke SE Pro Stroker Flywheel and Rod Assembly; 10.5:1 high-compression nickel-plated forged pistons with Teflon coated skirts; Titanium SST piston rings; SE-266E high-lift cams; Perfect Fit push rods +.030; SE high-performance lifters; CNC-ported MVA heads with automatic compression release (19206-12 and 19220-12 only); machined lower rocker boxes for valve spring collar clearance; factory-machined engine cases; unique piston oilers for stroker clearances; Screamin' Eagle performance inner cam bearings; Lefty high-performance crankcase output bearing; SE Performance Spark Plugs; 120R cam cover and head medallions; High Volume Oil Pump; and Billet Cam Plate.

Genuine Harley-Davidson

A cost-effective alternative for upgrading the performance of your bike. The intake and exhaust ports are meticulously machined to smooth the surfaces, enhancing the flow characteristics of air and fuel to provide enhanced performance. But it doesn't stop there: oversized (1.875") stainless steel intake valves and stock (1.575") stainless steel exhaust valves rest in reshaped valve seats that improve flow rates. The combustion chambers have been machined to smooth the surface, and feature a blended radius on the bathtub's edge to reduce detonation by eliminating hot spots and promoting improved combustion. The head gasket surface has been milled to maintain stock combustion chamber volume, which results in stock compression when used with Original Equipment pistons. Compression can be increased with the installation of matched Screamin' Eagle high compression pistons. Heads are assembled with high performance valve springs that support cams with lift up to.585".

Genuine Harley-Davidson

Now, racers can take their model's Original Equipment 110 cubic inch motor to a full 117 cubic inches without removing the engine from the chassis. The Screamin' Eagle team has engineered a 4.125" Big Bore Cylinder and Piston package that increase the internal bore from 4.0" to 4.125", without increasing the outside diameter of the cylinder spigot. The cylinder slips into the existing case bore without modification. Have you already installed a CVO Stage III performance kit on your CVO 110 Twin Cam motor? If so, you can retain that performance investment and combine those components with this kit. This kit will add a whopping 7 cubic inches of displacement for more torque throughout the RPM range. The kit includes front and rear cylinders, system-matched pistons with rings, and cylinder head gaskets. All EFI models require ECM calibration (priced separately). For race application only.

Genuine Harley-Davidson

Screamin' Eagle 68mm Throttle Body

Genuine Harley-Davidson

These performance Beehive-shaped valve springs provide increased stiffness and strength in a compact design. Designed to support the installation of higher lift cams, these performance springs help maintain the stability of the valve train in high RPM conditions. When compressed, these valves have a higher rate of stiffness to keep the valves from bouncing off the valve seat or "floating" during aggressive throttle application. Kit includes 8 springs, upper collars and keepers and lower collars with integral valve seals.