Doppelsitzbänke für Harley-Davidson CVO TRIKE
doppelsitzbänke für die CVO TRIKE — Original HD und Aftermarket-Alternativen, alle Baujahre. Wählen Sie Ihr Baujahr für exakte Passform und Preise.
Original Harley-Davidson (4)
Original Harley-Davidson
Super Reach Seat
54382-11
Original Harley-Davidson
Sundowner Street Glide Stitching Deep Bucket Seat
51630-09A
Original Harley-Davidson
Sundowner Smooth Deep Bucket Seat
52093-08A
Original Harley-Davidson
Low-Profile Leather Bucket Seat
52095-08AAftermarket-Alternativen
doppelsitzbänke aus dem Aftermarket, passend für die CVO TRIKE. Original Harley-Davidson Teile sind oben gelistet.
MCS
Seat, clutch springs
Feuling
Pilot Seat Cutter for M8<br><ul><li>Machine valve spring seats for proper installed spring height and spring cup fitment</li><li>Cutter bodies and pilots are interchangeable</li><li>Hardened pilots fit all 3/8 and hand drills</li><li>For valve guides with 6 mm valves.</li></ul>
Feuling
Valve Spring Seat Cutter<br><ul><li>Machine valve spring seats for proper installed spring height and spring cup fitment</li><li>Hardened pilots fit all 3/8" and 1/2" hand drills </li><li>Cutter bodies and pilots are interchangeable</li><li>Cutter: Cuts spring seat 0.550" ID x 1.180" OD</li><li>The M8 cylinder head material under the valve spring seat pocket to the top side of the exhaust port is fairly thin even more so on ported cylinder heads.</li><li>Designed for M8 cylinder heads using high lift camshafts - see Feuling M8 valve springs kits part# 1107,1108,1207.</li></ul>
Feuling
Race Series® Full-Travel Hydraulic Lifters<br><ul><li>Full-travel hydraulic lifters made from machined steel designed with .200" of travel</li><li>Exceed the needs of large-lift camshafts and higher spring pressures with a slower bleed-down rate</li><li>Maintain proper and critical oil flow to valves, springs, rockers, shafts and valve guides</li><li>Increases engine RPM and valvetrain stability; decreases valve float for maximum valve lift</li><li>Recommended for both strip and performance street engines</li><li>Made in the USA</li><li>High-volume oil pump recommended.</li><li>Recommended for engines running higher than 185 lb (84 kg) valve spring seat pressure.</li></ul><br>Must check clearance on front exhaust lifter to camshaft flange fit. Oversize +0.0015" outer diameter.
Feuling
Titanium Valve Spring Retainer Kit<br><ul><li>Titanium Valve Spring Retainer Kit for M8 models</li><li>Made in the USA</li></ul><br>Increases valve spring installed height without the need for removing/cutting valve spring seat pockets/depths.
Drag Specialties
SEAT MOUNT KNOB SOLO SEAT SIXS
Mustang
SEAT LOWDOWN TOURING 2UP - FL