Iron Stable

Touring

Page 300 of 752 — 36,084 products

OEM Parts Diagrams Exploded views for Touring Custom & Performance Aftermarket Only — Active Upgrades & Aftermarket Tap to clear filter
Bike BuilderBuild your bike →
Your Selection:

Showing 1–48 of 36,084

S&S MR103 Camshaft with Inner Gears Only<br><ul><li>Intended for camshaft replacement for motors that have already been converted to an S&amp;S gear drive system</li><li>Broad torque curve improves output over stock over the entire rpm range</li><li>Bolt-in for 103" engine</li><li>Made in the USA</li><li>Requires the use of high-performance valve springs.</li><li>Due to the inherent characteristics of gear drives, there may be more valve train noise.</li><li>Installer must check coil bind, valve-to-valve clearance and valve-to-piston clearance.</li></ul><br>Intended for camshaft replacement for motors that have already been converted to an S&S gear drive system. Requires the use of high-performance valve springs. Due to the inherent characteristics of gear drives, there may be more valve train noise.

MR103 Camshaft with Inner Gears Only<br><ul><li>Intended for camshaft replacement for motors that have already been converted to an S&amp;S gear drive system</li><li>Broad torque curve improves output over stock over the entire rpm range</li><li>Bolt-in for 103" engine</li><li>Made in the USA</li><li>Requires the use of high-performance valve springs.</li><li>Due to the inherent characteristics of gear drives, there may be more valve train noise.</li><li>Installer must check coil bind, valve-to-valve clearance and valve-to-piston clearance.</li></ul><br>Intended for camshaft replacement for motors that have already been converted to an S&S gear drive system. Requires the use of high-performance valve springs. Due to the inherent characteristics of gear drives, there may be more valve train noise.

S&S

#330-0463

£549.66£494.69
Member£467.21-15%
S&S 128" Power Package for 114"/117" Oil Cooled M8<br><ul><li>Made in the USA</li><li>Big Bore Kit</li><li>Big-bore bolt-on kit increases 114"/117" with 4-1/2" stroke M-Eight to 128" with no case machining required</li><li>4-1/4" bore cylinders with 11:1 forged pistons</li><li>Oil Pump/Cam Plate</li><li>S&amp;S oil pump/cam plate with blue anodized finish</li><li>Passage plugs are removable for servicing</li><li>Independent scavenge sections for flywheel cavity and camchest</li><li>Debris screen in both scavenge pickups</li><li>Magnet in camchest to help prevent debris from entering the oil pump</li><li>Increased oil flow capacity on both the oil feed and scavenge side</li><li>Adjustable pressure relief valve can be adjusted with the unit installed in the engine</li><li>Pushrods</li><li>Quikee pushrods with chrome pushrod tubes</li><li>Tappets</li><li>S&amp;S premium tappets</li><li>Tappet Cuffs</li><li>S&amp;S hard-anodized, black coated tappet cuffs are billet aluminum construction</li><li>Improve tappet stability in high-lift, high-rpm situations</li><li>Cam</li><li>S&amp;S 550 cams designed for big bore applications</li><li>Valve Springs</li><li>S&amp;S valve springs work with cams up to .605" lift</li><li>High-performance conical single-wire spring design</li><li>All necessary gaskets, bearings and hardware for bolt-on installation is included</li></ul><br>Not recommended for Tri-Glide or other three wheel models including conversion due to lugging nature of these bikes.

128" Power Package for 114"/117" Oil Cooled M8<br><ul><li>Made in the USA</li><li>Big Bore Kit</li><li>Big-bore bolt-on kit increases 114"/117" with 4-1/2" stroke M-Eight to 128" with no case machining required</li><li>4-1/4" bore cylinders with 11:1 forged pistons</li><li>Oil Pump/Cam Plate</li><li>S&amp;S oil pump/cam plate with blue anodized finish</li><li>Passage plugs are removable for servicing</li><li>Independent scavenge sections for flywheel cavity and camchest</li><li>Debris screen in both scavenge pickups</li><li>Magnet in camchest to help prevent debris from entering the oil pump</li><li>Increased oil flow capacity on both the oil feed and scavenge side</li><li>Adjustable pressure relief valve can be adjusted with the unit installed in the engine</li><li>Pushrods</li><li>Quikee pushrods with chrome pushrod tubes</li><li>Tappets</li><li>S&amp;S premium tappets</li><li>Tappet Cuffs</li><li>S&amp;S hard-anodized, black coated tappet cuffs are billet aluminum construction</li><li>Improve tappet stability in high-lift, high-rpm situations</li><li>Cam</li><li>S&amp;S 550 cams designed for big bore applications</li><li>Valve Springs</li><li>S&amp;S valve springs work with cams up to .605" lift</li><li>High-performance conical single-wire spring design</li><li>All necessary gaskets, bearings and hardware for bolt-on installation is included</li></ul><br>Not recommended for Tri-Glide or other three wheel models including conversion due to lugging nature of these bikes.

S&S

#310-1106A

£3834.46£3451.01
Member£3259.29-15%
S&S 128" Power Package Engine Performance Kit<br><ul><li>Big-bore bolt-on kit increases 114"/117" with 4-1/2" stroke M-Eight with no case machining required</li><li>4-1/4" bore cylinders with 11:1 forged pistons</li><li>S&amp;S oil pump/cam plate with blue anodized finish</li><li>Passage plugs are removable for servicing</li><li>Independent scavenge sections for flywheel cavity and cam chest</li><li>Debris screen in both scavenge pickups</li><li>Magnet in cam chest to help prevent debris from entering the oil pump</li><li>Increased oil flow capacity on both the oil feed and scavenge side</li><li>Adjustable pressure relief valve can be adjusted with the unit installed in the engine</li><li>Quickee pushrods with chrome pushrod tubes</li><li>S&amp;S premium tappets</li><li>S&amp;S hard-anodized, black coated tappet cuffs are billet aluminum construction</li><li>Improve tappet stability in high-lift, high-rpm situations</li><li>S&amp;S 550 cams designed for big bore applications</li><li>S&amp;S valve springs work with cams up to .605" lift</li><li>High-performance conical single-wire spring design</li><li>All necessary gaskets, bearings, and hardware for bolt-on installation is included</li><li>Made in the U.S.A.</li></ul><br>Not recommended for Tri-Glide or other three wheel models including conversion due to lugging nature of these bikes.

128" Power Package Engine Performance Kit<br><ul><li>Big-bore bolt-on kit increases 114"/117" with 4-1/2" stroke M-Eight with no case machining required</li><li>4-1/4" bore cylinders with 11:1 forged pistons</li><li>S&amp;S oil pump/cam plate with blue anodized finish</li><li>Passage plugs are removable for servicing</li><li>Independent scavenge sections for flywheel cavity and cam chest</li><li>Debris screen in both scavenge pickups</li><li>Magnet in cam chest to help prevent debris from entering the oil pump</li><li>Increased oil flow capacity on both the oil feed and scavenge side</li><li>Adjustable pressure relief valve can be adjusted with the unit installed in the engine</li><li>Quickee pushrods with chrome pushrod tubes</li><li>S&amp;S premium tappets</li><li>S&amp;S hard-anodized, black coated tappet cuffs are billet aluminum construction</li><li>Improve tappet stability in high-lift, high-rpm situations</li><li>S&amp;S 550 cams designed for big bore applications</li><li>S&amp;S valve springs work with cams up to .605" lift</li><li>High-performance conical single-wire spring design</li><li>All necessary gaskets, bearings, and hardware for bolt-on installation is included</li><li>Made in the U.S.A.</li></ul><br>Not recommended for Tri-Glide or other three wheel models including conversion due to lugging nature of these bikes.

S&S

#310-1107B

£3549.13£3194.22
Member£3016.76-15%
S&S 128" Power Package for 114"/117" Oil Cooled M8<br><ul><li>Made in the USA</li><li>Big Bore Kit</li><li>Big-bore bolt-on kit increases 114"/117" with 4-1/2" stroke M-Eight to 128" with no case machining required</li><li>4-1/4" bore cylinders with 11:1 forged pistons</li><li>Oil Pump/Cam Plate</li><li>S&amp;S oil pump/cam plate with blue anodized finish</li><li>Passage plugs are removable for servicing</li><li>Independent scavenge sections for flywheel cavity and camchest</li><li>Debris screen in both scavenge pickups</li><li>Magnet in camchest to help prevent debris from entering the oil pump</li><li>Increased oil flow capacity on both the oil feed and scavenge side</li><li>Adjustable pressure relief valve can be adjusted with the unit installed in the engine</li><li>Pushrods</li><li>Quikee pushrods with chrome pushrod tubes</li><li>Tappets</li><li>S&amp;S premium tappets</li><li>Tappet Cuffs</li><li>S&amp;S hard-anodized, black coated tappet cuffs are billet aluminum construction</li><li>Improve tappet stability in high-lift, high-rpm situations</li><li>Cam</li><li>S&amp;S 550 cams designed for big bore applications</li><li>Valve Springs</li><li>S&amp;S valve springs work with cams up to .605" lift</li><li>High-performance conical single-wire spring design</li><li>All necessary gaskets, bearings and hardware for bolt-on installation is included</li></ul><br>Not recommended for Tri-Glide or other three wheel models including conversion due to lugging nature of these bikes.

128" Power Package for 114"/117" Oil Cooled M8<br><ul><li>Made in the USA</li><li>Big Bore Kit</li><li>Big-bore bolt-on kit increases 114"/117" with 4-1/2" stroke M-Eight to 128" with no case machining required</li><li>4-1/4" bore cylinders with 11:1 forged pistons</li><li>Oil Pump/Cam Plate</li><li>S&amp;S oil pump/cam plate with blue anodized finish</li><li>Passage plugs are removable for servicing</li><li>Independent scavenge sections for flywheel cavity and camchest</li><li>Debris screen in both scavenge pickups</li><li>Magnet in camchest to help prevent debris from entering the oil pump</li><li>Increased oil flow capacity on both the oil feed and scavenge side</li><li>Adjustable pressure relief valve can be adjusted with the unit installed in the engine</li><li>Pushrods</li><li>Quikee pushrods with chrome pushrod tubes</li><li>Tappets</li><li>S&amp;S premium tappets</li><li>Tappet Cuffs</li><li>S&amp;S hard-anodized, black coated tappet cuffs are billet aluminum construction</li><li>Improve tappet stability in high-lift, high-rpm situations</li><li>Cam</li><li>S&amp;S 550 cams designed for big bore applications</li><li>Valve Springs</li><li>S&amp;S valve springs work with cams up to .605" lift</li><li>High-performance conical single-wire spring design</li><li>All necessary gaskets, bearings and hardware for bolt-on installation is included</li></ul><br>Not recommended for Tri-Glide or other three wheel models including conversion due to lugging nature of these bikes.

S&S

#310-1109B

£3617.63£3255.87
Member£3074.99-15%
S&S 129" Power Package Engine Performance Kit<br><ul><li>Transform 107" oil-cooled M8 into 129" with no case machining required</li><li>Big bore cylinders come with matching cam, cam plate and oil pump</li><li>Independent scavenge sections for flywheel cavity and cam chest</li><li>Magnet in cam chest to help prevent debris from entering oil pump</li><li>Feature high-performance conical single-wire S&amp;S valve springs</li><li>Original engine serial numbers are retained</li><li>Passage plugs are removable for servicing</li><li>Debris screen in both scavenge pickups</li><li>MLS (multi-layered steel) head gaskets</li><li>Performance matched 550 cam</li><li>Works with stock crankcase</li><li>Made in the USA</li></ul><br>Kit includes camplate, 550G camshaft kit, Quickee pushrod kit with chrome covers, tappet cuffs lifter guide, spring kit, big bore cylinder kit, oil cooled oil pump and hydraulic tappet set.

129" Power Package Engine Performance Kit<br><ul><li>Transform 107" oil-cooled M8 into 129" with no case machining required</li><li>Big bore cylinders come with matching cam, cam plate and oil pump</li><li>Independent scavenge sections for flywheel cavity and cam chest</li><li>Magnet in cam chest to help prevent debris from entering oil pump</li><li>Feature high-performance conical single-wire S&amp;S valve springs</li><li>Original engine serial numbers are retained</li><li>Passage plugs are removable for servicing</li><li>Debris screen in both scavenge pickups</li><li>MLS (multi-layered steel) head gaskets</li><li>Performance matched 550 cam</li><li>Works with stock crankcase</li><li>Made in the USA</li></ul><br>Kit includes camplate, 550G camshaft kit, Quickee pushrod kit with chrome covers, tappet cuffs lifter guide, spring kit, big bore cylinder kit, oil cooled oil pump and hydraulic tappet set.

S&S

#310-1224

£3369.06£3032.15
Member£2863.70-15%
S&S Cam Chest Kit for M8<br><ul><li>All parts in each kit are matched to ensure superior quality, fit, finish and performance</li><li>Oil pump and cam plate are precision-machined from billet aluminum with a blue anodized finish</li><li>Passage plugs removable for servicing</li><li>Independent scavenge sections for the flywheel cavity and cam chest</li><li>Debris screens in both scavenge pickups</li><li>Increased oil flow capacity on both the feed and scavenge sides</li><li>Adjustable Pressure Relief Valve is adjustable with unit installed in engine</li><li>Magnet in cam chest to help to stop debris from entering oil pump</li><li>S&amp;S Quickee Pushrods with finished pushrod tubes</li><li>S&amp;S premium tappets</li><li>Billet aluminum tappet cuffs have a hard-anodized black coating and are stronger than stock to eliminate distortion</li><li>Improved tappet stability in high-lift and high-rpm situations</li><li>Provides improved cam timing accuracy and eliminates the stock cam chain tensioner</li><li>Includes outer drive gears, all gaskets, bearings, and hardware required for a complete installation</li><li>Made in the USA</li></ul><br>475 is a bolt-in 100 horsepower cam. Kit Includes: • Oil Pump Screw Kit • 475G Camshaft • Cam Drive Gear Kit • 31 Tooth Pinion Gear • Camshaft Installation Kit • Quickee Pushrod Kit with Chrome Covers • Tappet Cuffs Lifter Guide • 3" S&S® Blue and White Logo Decal • Cam Plate Support Assembly • Oil Cooled Oil Pump Assembly • Hydraulic Precision Tappet Set • 1 oz Torco® Engine Assembly Lube

Cam Chest Kit for M8<br><ul><li>All parts in each kit are matched to ensure superior quality, fit, finish and performance</li><li>Oil pump and cam plate are precision-machined from billet aluminum with a blue anodized finish</li><li>Passage plugs removable for servicing</li><li>Independent scavenge sections for the flywheel cavity and cam chest</li><li>Debris screens in both scavenge pickups</li><li>Increased oil flow capacity on both the feed and scavenge sides</li><li>Adjustable Pressure Relief Valve is adjustable with unit installed in engine</li><li>Magnet in cam chest to help to stop debris from entering oil pump</li><li>S&amp;S Quickee Pushrods with finished pushrod tubes</li><li>S&amp;S premium tappets</li><li>Billet aluminum tappet cuffs have a hard-anodized black coating and are stronger than stock to eliminate distortion</li><li>Improved tappet stability in high-lift and high-rpm situations</li><li>Provides improved cam timing accuracy and eliminates the stock cam chain tensioner</li><li>Includes outer drive gears, all gaskets, bearings, and hardware required for a complete installation</li><li>Made in the USA</li></ul><br>475 is a bolt-in 100 horsepower cam. Kit Includes: • Oil Pump Screw Kit • 475G Camshaft • Cam Drive Gear Kit • 31 Tooth Pinion Gear • Camshaft Installation Kit • Quickee Pushrod Kit with Chrome Covers • Tappet Cuffs Lifter Guide • 3" S&S® Blue and White Logo Decal • Cam Plate Support Assembly • Oil Cooled Oil Pump Assembly • Hydraulic Precision Tappet Set • 1 oz Torco® Engine Assembly Lube

S&S

#310-1006A

£1836.19£1652.57
Member£1560.76-15%

Touring Models

FLHT (23217) FLHR (22001) FLHX (21188) FLHTCU (21153) FLHTC (20561) FLTRX (17612) FLHRC (17261) FLHTK (16948) FLTR (16787) FLHXSE (16350) FLHC (16279) FLH (16279) FLTRU (15714) FLHXS (15503) FLTRXS (15378) FLHTCUI (14955) FLHRI (14509) FLHRCI (14475) FLHTCI (14434) FLHTKL (14424) FLTRI (14211) FLHRXS (13683) FLHS (13498) FLTC (13189) FLTRK (12980) FLHRS (12801) FLHTCUL (12518) FLHXST (12146) FLHTI (12114) FLTRXST (12109) FLHRSI (12004) FLTCU (11596) FLT (11512) FLHFB (11455) FLHXI (11449) FLHXSANV (10855) FLHTKANV (10849) FLTRXSANV (10771) FLHXU (10573) FLTCUI (9879)

Top Brands

Harley-Davidson Harley-Davidson Zodiac (Genuine Zodiac Products) Zodiac (Genuine Zodiac Products) MCS MCS Harley-Davidson Accessories Harley-Davidson Accessories Arlen Ness Arlen Ness Drag Specialties Drag Specialties V-Twin Mfg V-Twin Mfg James Gaskets James Gaskets Colony Colony S&S S&S S&S S&S Performance Machine Performance Machine Jims Jims Eastern Eastern Kuryakyn Kuryakyn Samwel Samwel

Free UK Delivery

On orders over £100

14-Day Returns

Easy & hassle-free

Authorised Dealer

Iron City Motorcycles

Secure Payment

256-bit encryption

It looks like you're in Europe

Would you like to view prices in €?