Iron Stable
Cult-Werk

Cult-Werk Parts & Accessories

569 products

Cult-Werk are an Austrian manufacturer making custom bodywork and styling components for Harley-Davidson — ABS and fibreglass body panels, fender modifications, fork covers, air intake trims, and electrical component housings. The focus is Softail, Sportster, and Touring families, with clean lines and aggressive styling cues.

Engineered for direct fitment using factory mounting points wherever possible. If you want to significantly change the visual profile of a modern Harley without fabricating everything from scratch, Cult-Werk is one of the best European options.

Bike BuilderBuild your bike →
Your Selection:

Showing 1–48 of 569 by Cult-Werk

Cult-Werk Rear Conversion Kit Old School<br><ul><li>All bores and millings are milled on the most modern 5-axis CNC machining centers, so the part fits perfectly and without adjustments</li><li>The fender can be installed in different lengths and simply be shortened at the desired point when attaching it to the swingarm</li><li>With the frame cover, everything under the swing saddle is also covered, so that neither screw points, dampers nor cables can be seen</li></ul>

Rear Conversion Kit Old School<br><ul><li>All bores and millings are milled on the most modern 5-axis CNC machining centers, so the part fits perfectly and without adjustments</li><li>The fender can be installed in different lengths and simply be shortened at the desired point when attaching it to the swingarm</li><li>With the frame cover, everything under the swing saddle is also covered, so that neither screw points, dampers nor cables can be seen</li></ul>

Cult-Werk

#HD-BRO128

£1216.88£1192.54
Member£1156.04-5%
Cult-Werk Rear Conversion Kit Custom<br><ul><li>The rear conversion comes with a wiring harness including a resistor for the correct flashing frequency</li><li>The conversion is therefore absolutely Plug and Play</li><li>The original license plate light must continue to be used and connected to the existing wires (red &amp; black) with the cable harness</li><li>This Cult-Werk tail conversion is an ABS plastic part and is CNC milled on the most modern 5-axis machining centers</li><li>Parts are OE quality</li><li>The complete conversion kit consists of a rear fender incl. mounting kit as well as integrated LED rear and brake lights and turn signals</li></ul><br>- ABS rear fender - 6x LED rear and brake lights 2 in 1 (already on the wiring harness) - 4x LED indicators (already on the wiring harness) - Mounting material - 2x brackets for reinforcement - Wiring harness incl. resistor and connector = plug and play

Rear Conversion Kit Custom<br><ul><li>The rear conversion comes with a wiring harness including a resistor for the correct flashing frequency</li><li>The conversion is therefore absolutely Plug and Play</li><li>The original license plate light must continue to be used and connected to the existing wires (red &amp; black) with the cable harness</li><li>This Cult-Werk tail conversion is an ABS plastic part and is CNC milled on the most modern 5-axis machining centers</li><li>Parts are OE quality</li><li>The complete conversion kit consists of a rear fender incl. mounting kit as well as integrated LED rear and brake lights and turn signals</li></ul><br>- ABS rear fender - 6x LED rear and brake lights 2 in 1 (already on the wiring harness) - 4x LED indicators (already on the wiring harness) - Mounting material - 2x brackets for reinforcement - Wiring harness incl. resistor and connector = plug and play

Cult-Werk

#HD-TOU023

£1169.00£1145.62
Member£1110.55-5%
Cult-Werk License Plate Kit<br><ul><li>LED lighting set 3in1 incl. bracket</li><li>The bracket on which the LED 3in1 lighting including the E-mark is attached was made of steel and then powder-coated in glossy black</li><li>The lighting unit is required if you remove the original lighting bracket and use a side license plate holder</li><li>The holder is screwed to the original mounting points in the rear part using the mounting material provided</li><li>Then the wiring of the LED lighting has to be carried out</li></ul>

License Plate Kit<br><ul><li>LED lighting set 3in1 incl. bracket</li><li>The bracket on which the LED 3in1 lighting including the E-mark is attached was made of steel and then powder-coated in glossy black</li><li>The lighting unit is required if you remove the original lighting bracket and use a side license plate holder</li><li>The holder is screwed to the original mounting points in the rear part using the mounting material provided</li><li>Then the wiring of the LED lighting has to be carried out</li></ul>

Cult-Werk

#HD-SPS021-A-F

£577.98£566.42
Member£549.08-5%
Cult-Werk License Plate Kit<br><ul><li>LED lighting set 3in1 incl. bracket</li><li>The bracket on which the LED 3in1 lighting including the E-mark is attached was made of steel and then powder-coated in glossy black</li><li>The lighting unit is required if you remove the original lighting bracket and use a side license plate holder</li><li>The holder is screwed to the original mounting points in the rear part using the mounting material provided</li><li>Then the wiring of the LED lighting has to be carried out</li></ul>

License Plate Kit<br><ul><li>LED lighting set 3in1 incl. bracket</li><li>The bracket on which the LED 3in1 lighting including the E-mark is attached was made of steel and then powder-coated in glossy black</li><li>The lighting unit is required if you remove the original lighting bracket and use a side license plate holder</li><li>The holder is screwed to the original mounting points in the rear part using the mounting material provided</li><li>Then the wiring of the LED lighting has to be carried out</li></ul>

Cult-Werk

#HD-SPS021-D-F

£577.98£566.42
Member£549.08-5%
Cult-Werk Headlight Kit<br><ul><li>The Cult-Werk headlight kit "Night Rod Style" gives the Breakout the popular look of the Harley-Davidson ® Night Rod</li><li>It must be soldered to the original wiring harness!</li><li>The CNC lasered headlight bracket lowers the headlight by approx. 30 mm</li><li>The speedometer remains in the original position</li><li>The headlight mask is made of high-quality ABS plastic</li><li>No changes to the original cables are necessary</li><li>All changes are mounted on the original breakpoints, thus ensuring a firm and secure hold</li><li>The headlight can be adjusted via a slot</li><li>The included headlight does not contain an integrated position light.</li></ul>

Headlight Kit<br><ul><li>The Cult-Werk headlight kit "Night Rod Style" gives the Breakout the popular look of the Harley-Davidson ® Night Rod</li><li>It must be soldered to the original wiring harness!</li><li>The CNC lasered headlight bracket lowers the headlight by approx. 30 mm</li><li>The speedometer remains in the original position</li><li>The headlight mask is made of high-quality ABS plastic</li><li>No changes to the original cables are necessary</li><li>All changes are mounted on the original breakpoints, thus ensuring a firm and secure hold</li><li>The headlight can be adjusted via a slot</li><li>The included headlight does not contain an integrated position light.</li></ul>

Cult-Werk

#HD-BRO082

£506.39£496.26
Member£481.07-5%
Cult-Werk License Plate Kit<br><ul><li>LED lighting set 3in1 incl. bracket</li><li>The bracket on which the LED 3in1 lighting including the E-mark is attached was made of steel and then powder-coated in glossy black</li><li>The lighting unit is required if you remove the original lighting bracket and use a side license plate holder</li><li>The holder is screwed to the original mounting points in the rear part using the mounting material provided</li><li>Then the wiring of the LED lighting has to be carried out</li></ul>

License Plate Kit<br><ul><li>LED lighting set 3in1 incl. bracket</li><li>The bracket on which the LED 3in1 lighting including the E-mark is attached was made of steel and then powder-coated in glossy black</li><li>The lighting unit is required if you remove the original lighting bracket and use a side license plate holder</li><li>The holder is screwed to the original mounting points in the rear part using the mounting material provided</li><li>Then the wiring of the LED lighting has to be carried out</li></ul>

Cult-Werk

#HD-SPS021-A

£478.13£468.57
Member£454.22-5%
Cult-Werk License Plate Kit<br><ul><li>LED lighting set 3in1 incl. bracket</li><li>The bracket on which the LED 3in1 lighting including the E-mark is attached was made of steel and then powder-coated in glossy black</li><li>The lighting unit is required if you remove the original lighting bracket and use a side license plate holder</li><li>The holder is screwed to the original mounting points in the rear part using the mounting material provided</li><li>Then the wiring of the LED lighting has to be carried out</li></ul>

License Plate Kit<br><ul><li>LED lighting set 3in1 incl. bracket</li><li>The bracket on which the LED 3in1 lighting including the E-mark is attached was made of steel and then powder-coated in glossy black</li><li>The lighting unit is required if you remove the original lighting bracket and use a side license plate holder</li><li>The holder is screwed to the original mounting points in the rear part using the mounting material provided</li><li>Then the wiring of the LED lighting has to be carried out</li></ul>

Cult-Werk

#HD-SPS021-NL

£478.13£468.57
Member£454.22-5%
Frame & ChassisFendersElectricalSuspension & ForksAccessoriesAir IntakeBodyworkWheels & TyresInstrumentsHandlebarsGas TanksFoot ControlsBelt DrivesSeats & LuggagePrimary CoversBrakesFasteners

Free UK Delivery

On orders over £100

14-Day Returns

Easy & hassle-free

Authorised Dealer

Iron City Motorcycles

Secure Payment

256-bit encryption

It looks like you're in Europe

Would you like to view prices in €?