Iron Stable
Cult-Werk

Cult-Werk Accessories

78 products

Your Selection:

Showing 1–48 of 78 Accessories by Cult-Werk

Cult-Werk Rear Conversion Kit Custom<br><ul><li>The rear conversion comes with a wiring harness including a resistor for the correct flashing frequency</li><li>The conversion is therefore absolutely Plug and Play</li><li>The original license plate light must continue to be used and connected to the existing wires (red &amp; black) with the cable harness</li><li>This Cult-Werk tail conversion is an ABS plastic part and is CNC milled on the most modern 5-axis machining centers</li><li>Parts are OE quality</li><li>The complete conversion kit consists of a rear fender incl. mounting kit as well as integrated LED rear and brake lights and turn signals</li></ul><br>- ABS rear fender - 6x LED rear and brake lights 2 in 1 (already on the wiring harness) - 4x LED indicators (already on the wiring harness) - Mounting material - 2x brackets for reinforcement - Wiring harness incl. resistor and connector = plug and play

Rear Conversion Kit Custom<br><ul><li>The rear conversion comes with a wiring harness including a resistor for the correct flashing frequency</li><li>The conversion is therefore absolutely Plug and Play</li><li>The original license plate light must continue to be used and connected to the existing wires (red &amp; black) with the cable harness</li><li>This Cult-Werk tail conversion is an ABS plastic part and is CNC milled on the most modern 5-axis machining centers</li><li>Parts are OE quality</li><li>The complete conversion kit consists of a rear fender incl. mounting kit as well as integrated LED rear and brake lights and turn signals</li></ul><br>- ABS rear fender - 6x LED rear and brake lights 2 in 1 (already on the wiring harness) - 4x LED indicators (already on the wiring harness) - Mounting material - 2x brackets for reinforcement - Wiring harness incl. resistor and connector = plug and play

Cult-Werk

#HD-TOU023

£1318.81£1186.93
Member£1120.99-15%
Cult-Werk License Plate Kit<br><ul><li>LED lighting set 3in1 incl. bracket</li><li>The bracket on which the LED 3in1 lighting including the E-mark is attached was made of steel and then powder-coated in glossy black</li><li>The lighting unit is required if you remove the original lighting bracket and use a side license plate holder</li><li>The holder is screwed to the original mounting points in the rear part using the mounting material provided</li><li>Then the wiring of the LED lighting has to be carried out</li></ul>

License Plate Kit<br><ul><li>LED lighting set 3in1 incl. bracket</li><li>The bracket on which the LED 3in1 lighting including the E-mark is attached was made of steel and then powder-coated in glossy black</li><li>The lighting unit is required if you remove the original lighting bracket and use a side license plate holder</li><li>The holder is screwed to the original mounting points in the rear part using the mounting material provided</li><li>Then the wiring of the LED lighting has to be carried out</li></ul>

Cult-Werk

#HD-SPS021-I

£541.02£486.92
Member£459.87-15%
Cult-Werk License Plate Kit<br><ul><li>LED lighting set 3in1 incl. bracket</li><li>The bracket on which the LED 3in1 lighting including the E-mark is attached was made of steel and then powder-coated in glossy black</li><li>The lighting unit is required if you remove the original lighting bracket and use a side license plate holder</li><li>The holder is screwed to the original mounting points in the rear part using the mounting material provided</li><li>Then the wiring of the LED lighting has to be carried out</li></ul>

License Plate Kit<br><ul><li>LED lighting set 3in1 incl. bracket</li><li>The bracket on which the LED 3in1 lighting including the E-mark is attached was made of steel and then powder-coated in glossy black</li><li>The lighting unit is required if you remove the original lighting bracket and use a side license plate holder</li><li>The holder is screwed to the original mounting points in the rear part using the mounting material provided</li><li>Then the wiring of the LED lighting has to be carried out</li></ul>

Cult-Werk

#HD-SPS021-A

£539.74£485.77
Member£458.78-15%
Cult-Werk License Plate Kit<br><ul><li>LED lighting set 3in1 incl. bracket</li><li>The bracket on which the LED 3in1 lighting including the E-mark is attached was made of steel and then powder-coated in glossy black</li><li>The lighting unit is required if you remove the original lighting bracket and use a side license plate holder</li><li>The holder is screwed to the original mounting points in the rear part using the mounting material provided</li><li>Then the wiring of the LED lighting has to be carried out</li></ul>

License Plate Kit<br><ul><li>LED lighting set 3in1 incl. bracket</li><li>The bracket on which the LED 3in1 lighting including the E-mark is attached was made of steel and then powder-coated in glossy black</li><li>The lighting unit is required if you remove the original lighting bracket and use a side license plate holder</li><li>The holder is screwed to the original mounting points in the rear part using the mounting material provided</li><li>Then the wiring of the LED lighting has to be carried out</li></ul>

Cult-Werk

#HD-SPS021-NL

£539.40£485.46
Member£458.49-15%
Cult-Werk License Plate Kit<br><ul><li>LED lighting set 3in1 incl. bracket</li><li>The bracket on which the LED 3in1 lighting including the E-mark is attached was made of steel and then powder-coated in glossy black</li><li>The lighting unit is required if you remove the original lighting bracket and use a side license plate holder</li><li>The holder is screwed to the original mounting points in the rear part using the mounting material provided</li><li>Then the wiring of the LED lighting has to be carried out</li></ul>

License Plate Kit<br><ul><li>LED lighting set 3in1 incl. bracket</li><li>The bracket on which the LED 3in1 lighting including the E-mark is attached was made of steel and then powder-coated in glossy black</li><li>The lighting unit is required if you remove the original lighting bracket and use a side license plate holder</li><li>The holder is screwed to the original mounting points in the rear part using the mounting material provided</li><li>Then the wiring of the LED lighting has to be carried out</li></ul>

Cult-Werk

#HD-SPS021-CH

£526.00£473.40
Member£447.10-15%
Cult-Werk Spoiler Custom<br><ul><li>Made out of ABS Plastic</li><li>Two versions available: Paintable (RAW) or Glossy Black (BK)</li><li>The "Paintable" (RAW) Side Painel are easy to paint due to the great surface finish, no preparation necessary</li><li>The "Glossy Black" (BK) Side Panel are ready to be mounted after removal of the protective film</li><li>All bores and millings are milled on the most modern 5-axis CNC machining centers, so that the front spoiler only has to be screwed onto the metal bracket supplied</li></ul>

Spoiler Custom<br><ul><li>Made out of ABS Plastic</li><li>Two versions available: Paintable (RAW) or Glossy Black (BK)</li><li>The "Paintable" (RAW) Side Painel are easy to paint due to the great surface finish, no preparation necessary</li><li>The "Glossy Black" (BK) Side Panel are ready to be mounted after removal of the protective film</li><li>All bores and millings are milled on the most modern 5-axis CNC machining centers, so that the front spoiler only has to be screwed onto the metal bracket supplied</li></ul>

Cult-Werk

#HD-BRO081

£429.31£386.38
Member£364.91-15%
Cult-Werk Fork Covers<br><ul><li>Our covers are made of high-quality aluminum and are milled on the most modern 5-axis machining centers and then powder-coated in glossy black.</li><li>This guarantees the highest quality! </li><li>The assembly is very simple, the upper and the lower cover are only pushed over the fork tube and screwed tight. </li><li>On the inside of the lower cover there is a cut-out for clearance on the fender and is therefore hardly visible.</li></ul>

Fork Covers<br><ul><li>Our covers are made of high-quality aluminum and are milled on the most modern 5-axis machining centers and then powder-coated in glossy black.</li><li>This guarantees the highest quality! </li><li>The assembly is very simple, the upper and the lower cover are only pushed over the fork tube and screwed tight. </li><li>On the inside of the lower cover there is a cut-out for clearance on the fender and is therefore hardly visible.</li></ul>

Cult-Werk

#HD-ROD026

£353.63£318.27
Member£300.59-15%
Cult-Werk Fork Covers<br><ul><li>Our covers are made of high-quality aluminum and are milled on the most modern 5-axis machining centers and then powder-coated in glossy black.</li><li>This guarantees the highest quality! </li><li>The assembly is very simple, the upper and the lower cover are only pushed over the fork tube and screwed tight. </li><li>On the inside of the lower cover there is a cut-out for clearance on the fender and is therefore hardly visible.</li></ul>

Fork Covers<br><ul><li>Our covers are made of high-quality aluminum and are milled on the most modern 5-axis machining centers and then powder-coated in glossy black.</li><li>This guarantees the highest quality! </li><li>The assembly is very simple, the upper and the lower cover are only pushed over the fork tube and screwed tight. </li><li>On the inside of the lower cover there is a cut-out for clearance on the fender and is therefore hardly visible.</li></ul>

Cult-Werk

#HD-BRO045

£255.96£230.36
Member£217.57-15%
Cult-Werk Spoiler Racing<br><ul><li>Made out of ABS Plastic</li><li>Two versions available: Paintable (RAW) or Glossy Black (BK)</li><li>The "Paintable" (RAW) Side Painel are easy to paint due to the great surface finish, no preparation necessary</li><li>The "Glossy Black" (BK) Side Panel are ready to be mounted after removal of the protective film</li><li>All bores and millings are milled on the most modern 5-axis CNC machining centers, so that the front spoiler only has to be screwed onto the metal bracket supplied</li></ul>

Spoiler Racing<br><ul><li>Made out of ABS Plastic</li><li>Two versions available: Paintable (RAW) or Glossy Black (BK)</li><li>The "Paintable" (RAW) Side Painel are easy to paint due to the great surface finish, no preparation necessary</li><li>The "Glossy Black" (BK) Side Panel are ready to be mounted after removal of the protective film</li><li>All bores and millings are milled on the most modern 5-axis CNC machining centers, so that the front spoiler only has to be screwed onto the metal bracket supplied</li></ul>

Cult-Werk

#HD-BRO008

£238.25£214.43
Member£202.51-15%
Cult-Werk Dash Cover for Harley<br><ul><li>The part gives your Harley a clean and cool look on the tank and is needed as a replacement for the original cover if the speedometer is to be moved into the dash cover</li><li>This cover is a 100% accurate fitting ABS plastic part</li><li>All drillings and millings are milled on the most modern 5-axis CNC machining centres</li><li>All parts needed for mounting are included in delivery</li><li>Available in Paintable and Glossy Black</li></ul>

Dash Cover for Harley<br><ul><li>The part gives your Harley a clean and cool look on the tank and is needed as a replacement for the original cover if the speedometer is to be moved into the dash cover</li><li>This cover is a 100% accurate fitting ABS plastic part</li><li>All drillings and millings are milled on the most modern 5-axis CNC machining centres</li><li>All parts needed for mounting are included in delivery</li><li>Available in Paintable and Glossy Black</li></ul>

Cult-Werk

#HD-NSR027

£193.97£174.57
Member£164.87-15%
Cult-Werk Brake and Clutch Cylinder Cover<br><ul><li>Cult-Werk ® clutch and brake cylinder cover for Harley-Davidson ® Touring models from 2016 to 2020</li><li>The covers are milled from aluminum on the latest 5-axis CNC machines and replace the original, somewhat boring covers. Easy assembly: Loosen the 2 screws and replace them with the Cult-Werk cover. The matching screws in black are of course included. The original seal will continue to be used.</li><li> The cover was also CNC milled on the inside, ie the inside corresponds to the original cover, because guides for the seal are milled in there, which are still required! The covers "are approx. 25mm higher than the original covers and have been milled very elaborately.</li><li>Different levels, depressions and different radii make them appear extremely 3-dimensional and thus give your Harley a more aggressive and high-quality look</li></ul>

Brake and Clutch Cylinder Cover<br><ul><li>Cult-Werk ® clutch and brake cylinder cover for Harley-Davidson ® Touring models from 2016 to 2020</li><li>The covers are milled from aluminum on the latest 5-axis CNC machines and replace the original, somewhat boring covers. Easy assembly: Loosen the 2 screws and replace them with the Cult-Werk cover. The matching screws in black are of course included. The original seal will continue to be used.</li><li> The cover was also CNC milled on the inside, ie the inside corresponds to the original cover, because guides for the seal are milled in there, which are still required! The covers "are approx. 25mm higher than the original covers and have been milled very elaborately.</li><li>Different levels, depressions and different radii make them appear extremely 3-dimensional and thus give your Harley a more aggressive and high-quality look</li></ul>

Cult-Werk

#HD-TOU038

£190.43£171.39
Member£161.87-15%

Free UK Delivery

On orders over £100

14-Day Returns

Easy & hassle-free

Authorised Dealer

Iron City Motorcycles

Secure Payment

256-bit encryption

It looks like you're in Europe

Would you like to view prices in €?